Figure 2.1 Hardware Connections for the LSIU80ALVD

Internal

LED

Connector

SCSI

J4

Interface

 

J2

 

External

SCSI

Interface

J3

LSIU80ALVD

J1 to PCI Mainboard

Step 6. Carefully insert edge connector J1 (see Figure 2.1) of the host adapter into the PCI slot. Make sure the edge connector is properly aligned before pressing the board into place as shown in Figure 2.2.

Note: You may notice that the components on the PCI host adapter face the opposite way from non-PCI adapter boards you have in your system. This is correct, and the board is keyed to go in only one way.

Detailed Installation Procedure

2-5