2.2.2Inserting the Host Adapter

For safe and proper installation, check the user’s manual supplied with your computer and perform the following steps.

Step 1. Ground yourself before removing this host adapter board. Remove the LSIU80ALVD from the packing and check that it is not damaged. An example of this host adapter board is shown in Figure 2.1.

Step 2. Switch off and unplug power cords for all components in your system.

Step 3. Remove the cabinet cover from your computer to access the PCI slots.

Caution: Ground yourself by touching a metal surface before removing the cabinet top. Static charges on your body can damage electronic components. Handle plug-in boards by the edge; do not touch board components or gold connector contacts. The use of a static ground strap is recommended.

Step 4. Locate the slots for PCI plug-in board installation. Refer to the user’s manual for your computer to confirm the location of the PCI slots. The LSIU80ALVD requires a PCI slot that allows bus master operation.

Step 5. Remove the blank bracket panel on the back of the computer aligned with the PCI slot you intend to use. Save the bracket screw.

2-4

Installing the LSIU80ALVD