Lucent Technologies 518-456-151 manual Form C Supplemental Instructions Button Templates

Form C Supplemental Instructions: Button Templates

There are eight pages to Form C—one page for each type of system phone and one page for an Intercom Autodialer. Use Form C to record line and pool button assignments and to indicate programming for system telephone buttons that do not have lines or pools assigned if the programming is to be performed from extension 10 or 11 during system installation. After installation, users can program additional features using the instructions on their Quick Reference Cards.

A telephone button can be programmed as a line button (to access an outside line), as a pool button (to access a pool), as an Auto Dial button (to dial a phone number or a PBX/Centrex feature access code with one touch), or as a dial-code feature button (to access a dial-code feature with one touch). Line and pool buttons must have status lights; some features also require buttons with lights (see “Button Feature Summary”).

Using the information from Line Ringing and Line/Pool Access Restriction on Form B2, fill out Form C as follows:

■Make as many copies of each page of Form C as you need. Where line and other button assignments are identical for two or more phones of the same type, you can use one copy of the form and indicate the extension numbers sharing the programming in the space provided at the bottom of the form.

■Use either the button template (to record the exact location of buttons and the programming assigned to them) or the Check Desired Features checklist (to identify features to be programmed), or both. By default, lines are assigned to buttons in the following order:

PARTNER-34D Telephone
19
13	14	15	16	17	18
7	8	9	10	11	12
1	2	3	4	5	6
PARTNER-18D and PARTNER-18 Telephones
13	14	15	16
9	10	11	12
5	6	7	8
1	2	3	4

PARTNER-6 Telephone

34

12

MLS-34D Telephone
17	18	19
13	14	15	16
9	10	11	12
5	6	7	8
1	2	3	4
MLS-18D, MLS-12D®, and MLS-12®Telephones
13	14	15	16
9	10	11	12
5	6	7	8
1	2	3	4
NOTE: On MLS-12D and MLS-12 telephones, only buttons 1 through 10
have lights and can have lines assigned.
MLS-6®Telephone
1	2	3	4

■Indicate the order in which a line is selected when the user lifts the handset or presses Sto place a call without first pressing a line or button (Auto- matic Line Selection) if the order is to be different than the default (outside lines in ascending numerical order followed by intercom).

9