Lucent Technologies 518-456-151 manual F18

14

Group Hunting—RingHunt- g i77g

Rings the first available extension in the designated Hunt Group, or transfers a call to an extension in the group. If unanswered after 3 rings, the call moves to the next available extension, and so on, until the call is answered or until the caller hangs up. g = 1–6

Group Hunting—Voice Signal HuntVS- g i*77g

Voice signals the first available extension in the designated Hunt Group, or transfers a call to the extension with a voice-signaled announcement. The caller is connected only if that extension answers. g = 1–6

Group Pickup P/U Grp-gi66g

Picks up an intercom, transferred, or outside call ringing at any extension in the designated Pickup Group. g = 1–4

Last Number Redial LNRf05

Automatically redials the last outside number dialed up to a maximum of 28 digits. This feature can be used only to redial the last outside number dialed.

Loudspeaker Paging Loudspk i70

Connects the user to the loudspeaker paging system, if one is connected to the system.

Message Light Off MsgOff-xxf10xx

Turns off the message light on the phone at the designated extension. You can also program an extension number on the button.

Message Light On MsgOn-xxf09xx

Turns on the message light on the phone at the designated extension. You can also program an extension number on the button.

Privacy Privf07

Prevents other people with the same line from joining calls being conducted at this extension. When the feature is active, the button light is on. This feature overrides Automatic Extension Privacy {#304}.

Recall Recall f03

“Recalls” a dial tone to access a PBX/Centrex feature while on a call on a PBX/ Centrex line (pressing Recall disconnects an intercom call).

Save Number Redial SNRf04

This feature can be programmed onto more than one button. Using this feature while on an outside call saves the number dialed into temporary memory. The number stays in memory until a different one is saved; this feature can be used again to redial the number at any time. (Unlike Last Number Redial, the user must use this feature to save the number as well as to redial it; Save Number Redial lets the user make other outside calls before redialing the saved number.) Account codes cannot be saved and redialed using this feature.

Simultaneous Paging SPage i*70

Accesses the loudspeaker paging system and all idle system phones with speakers assigned to Calling Group 1.

Station Lock Lockf21

Lets the user lock the extension by entering a code of four digits (0-9) on the telephone dialpad.

Touch-Tone Enable TT-EN f08

Lets user with rotary lines access phone services that require touch-tone digits. For example, after calling a bank-by-phone service and being prompted to enter touch- tone digits, using this feature changes the digits dialed to touch tones for the rest of the call.

VMS Cover	VMSCover f15
Turns voice mail coverage for the extension on and off if PARTNER MAIL,

PARTNER MAIL VS, or PARTNER Voice Messaging is installed. When the feature is active, the button light is on. This feature overrides Automatic VMS Cover.

Voice Interrupt on Busy Talk-Back VIOB f18

Lets user respond to voice interrupt on busy call while still active on the existing call.

Voice Mail Messages VMMsgs-777 i777

Places an intercom call to the PARTNER MAIL, PARTNER MAIL VS, or PARTNER Voice Messaging (if available), so the user can check messages, send messages, or administer greetings.

Voice Mailbox Transfer VMBox f14

Transfers a caller directly to a specific extension’s voice mailbox, so that the caller can leave a message without having to first ring the extension.