Troubleshooting
Image Quality
|
|
|
|
|
|
| Problem | Solution |
| English | |
| Color or text is not being | manual.) But this projector can compress |
| ||
| Adjust the brightness up or down until the text is |
|
| ||
| projected. | visible. |
|
| |
| Some text or fonts are | For optimal results, set the computer’s resolu- |
|
| |
| not sharp with a com- | tion to 1024 x 768. (Refer to your computer user |
|
| |
| puter as an image | resolutions up to 1280 x 1024. |
|
| |
| source. |
|
| ||
|
|
|
|
| |
| Image isn’t centered on | • Be sure that the projector is at a 90° angle to |
|
| |
| the screen. |
|
| ||
| the screen. | • Reposition the image. |
|
| |
|
|
|
|
|
|
| Image is out of focus. | • Turn the projection lens to focus the image. |
|
| |
| • Make sure that the projection screen is at least |
|
| ||
|
| 5 ft (1.5 m) from the projector. |
|
| |
|
| • Check the projection lens to see if it needs |
|
| |
|
| cleaning. |
|
| |
| Image and menus are | • If projecting from a ceiling mount, make sure |
|
| |
| that Ceiling Projection is selected on the Setup |
|
| ||
| upside down. |
|
| ||
| tab in the Menu. |
|
| ||
|
| • If projecting from an upright position, make |
|
| |
|
| sure that Front or Rear projection is selected on |
|
| |
|
| the Setup tab in the Menu. |
|
| |
| Image and menus are | • If projecting from behind a screen make sure |
|
| |
| that Rear Projection is selected on the Setup tab |
|
| ||
| reversed from left to | in the Menu. |
|
| |
| right. | • If projecting in front of a screen, make sure that |
|
| |
|
| Front or Ceiling Projection is selected on the |
|
| |
|
| Setup tab in the Menu. |
|
|
|
|
| To adjust the contrast: |
|
| |
| Image appears flat with | 1.Press Menu and use the Adjust + |
|
| |
| go to the Adjust tab. |
|
| ||
| no contrast | 2.Use the Next button to highlight Contrast. |
|
| |
|
| 3.Use the Adjust + - buttons to increase or |
|
| |
|
| decrease the contrast. |
|
| |
|
| • Check the projection lens to see if it needs |
|
| |
| Image appears washed | cleaning. |
|
| |
| • To adjust the brightness: |
|
| ||
| out or dark |
|
| ||
| 1.Press Menu and use the Adjust + - buttons |
|
| ||
|
|
|
| ||
|
| to go to the Adjust tab. |
|
| |
|
| 2.Use the Next button to highlight Brightness. |
|
| |
|
| 3.Use the Adjust + - buttons to increase or |
|
| |
|
| decrease the brightness. |
|
| |
|
|
|
|
|
|
23
