dmc3-4
marked on the inside of the door access panel on the left side of the
Connect the green wire(s) from the patio station(s) to the Patio green terminal. Connect the patio Black wire(s) to the patio Black terminal. Note: Only two patio stations can be connected to the patio terminals. Connect the Red wire with the other Red wires to the Red terminal. Connect the White wire with the other White wires to the White terminal. Refer to Figure 14 for wire placement.
Connect the red and black wires of the door station cables (MS4DCX/MS4DCXSC) to the red and black door speaker terminals on the
from the door stations to the common terminal on the MC3 or
MC8. Connect each yellow wire to a note selection terminal. (Do not connect more than one yellow wire per note terminal.)
Plug in the modular chime plug to the 4 pin |
| |
Figure 16 – Chime | ||
connector labeled as CHIME on the | ||
unit as shown in Figure 16. | Plug Connection |
Connect the optional dmc1CD player RCA cables and control wire.
Connecting the Antenna
Separate the intercom cables from the antenna leads, if grouped together the intercom cables can shield the antenna leads resulting in poor radio reception. Keep the antenna leads away from metal ductwork and aluminum backed insulation. These can also shield the antenna leads.
The number and style of antenna leads will vary based on the intercom system being replaced. The
www.mssystems.com 800.421.1587
Page 17
