M&S Systems XDM4600 owner manual Wiringfor Audio Sources and IR Emitters

XDM4600

Figure 8—Wiring for Audio Sources and IR Emitters

Locate the source inputs on the back of the Central Controller and connect the appropriate audio source cables. Connect each source output, left and right, using quality audio source cables.

•Line-level audio cables carrying audio to the Central Controller are shown connecting the audio sources to the Central Controller.

•Line-level audio cables carrying audio out from the Central Controller are shown connecting the Central Controller to the tuner audio component.

The Emitters are plugged into the IR Emitter ports on the back of the Central Controller as shown in Figure 8.

•Connect each IR Emitter cable to the corresponding IR output on the back of the Central Controller.

•Remove the adhesive back and position each IR repeater on the product you wish to control. Stick the repeater directly over the audio equipment IR window. Extra adhesive backs are provided.

M&S Systems 800.421-1587 www.mssystems.com 15