M&S Systems XDM4600 owner manual Installing a Local Audio Source Wall Plate

Models: XDM4600

1 30
Download 30 pages 60.22 Kb
Page 27
Image 27
Installing a Local Audio Source Wall Plate

XDM4600

Installing a Local Audio Source Wall Plate

With the optional Wall Plate, you can connect a local audio source; such as a child’s own CD player or television, to the local Zone Keypad. Audio from the local source is accessible through the local Zone Keypad only. It is not available for Party Mode. See

Figure 14 for a wiring schematic.

Do not install Wall Plates in stud cavities that contain 120/240V appliance wiring, or within 18 inches of fluorescent lighting, dimmers, security wiring, and other control wiring.

The wall plate is installed in a single gang electrical box.

The wall plate uses a CAT 5 cable to connect to the keypad.

Do not place Wall Plates in air return cavities or walls that contain plumbing.

Place Wall Plates within six feet of the Zone Keypad. The Wall Plate can be located farther away, but may result in adding noise to the system.

Place the Wall Plate at the same height from the floor as household electrical outlets.

Figure 14—Optional Local Audio Source Zone Wall Plate

M&S Systems 800.421-1587 www.mssystems.com

22

Page 27
Image 27
M&S Systems XDM4600 owner manual Installing a Local Audio Source Wall Plate