Oxygen Series | User Guide 5 |
Program
This function sends Program Change MIDI messages on the Global Channel and can be used to select different sound patches contained within your virtual instrument or sound module.
1 Press the Advanced Function button
2.Press the Program key - the LED display will show the last sent program number (for example ".0.1.")
3.Enter the Program number
4.Press the Enter key to send the program change message
Program change messages can also be sent using the following method:
1.Press the Select button until the lower edge of the LED shows a red dot above "PGM"
2.Scroll through the Program numbers using the
Bank LSB
The Bank LSB function sends bank change messages on the Global MIDI channel. These messages are used to access additional banks of sound patches on virtual instruments or sound modules (if additional banks are available).
Refer to the documentation for the virtual instrument or synthesizer to confirm it will respond to these messages.
1.Press the Advanced button
2.Press the Bank LSB key - the LED display will show the last sent Bank LSB number (for example ".0.1.")
3.Enter the new Bank LSB number using the number keys
4.Press the Enter key
NOTE: Bank LSB messages will not have any effect until they are followed by a Program Change message. See Section 10 - MIDI Messages Defined for more information.
Bank MSB
The Bank MSB function sends bank change messages on the Global MIDI channel. These messages are used to access additional banks of sound patches on virtual instruments or sound modules (if additional banks are available).
Refer to the documentation for the virtual instrument or synthesizer to confirm it will respond to these messages.
1.Press the Advanced button
2.Press the Bank MSB key - the LED display will show the last sent Bank MSB number (for example ".0.1.")
3.Enter the new Bank MSB number using the number keys
4.Press the Enter key
NOTE: Bank MSB messages will not have any effect until they are followed by a Program Change message. See section 10, MIDI Messages Defined for more information.
Panic
Press the Advanced button followed by the Panic key to send an "All Notes Off" message on all 16 MIDI channels. This stops any stuck notes that continue to play even after their keys have been released.
