Oxygen Series | User Guide 8 |
Setting Buttons to send combined Program Change, Bank LSB and Bank MSB messages
The assignable buttons and the sustain pedal can be configured to send a
This requires four values to be specified (values given are examples):
| Key | Parameter |
| Value |
|
|
| ||
Control Assign | Program/Bank Preset select | 145 | ||
|
|
|
|
|
Data 1 | (example) | Program Change Number | 42 | (GM Instrument Cello - |
|
|
| see Appendix C) | |
|
|
|
|
|
Data 2 | (example) | Bank LSB number | 8 |
|
|
|
|
|
|
Data 3 | (example) | Bank MSB number | 32 |
|
|
|
|
|
|
The following example configures a button to send a total of 3 MIDI messages each time the button is pressed (Bank LSB, Bank MSB and Program Change), allowing you to recall any sound in any bank of a connected software or hardware synthesizer that supports this:
1.Select the Control as described earlier in this guide (Button or Pedal)
2.Press the Advanced button
3.Press the Control Assign key
4.Enter 145 using the number keys. This sets the button or the pedal to send a combined Bank Select/Program Change message
5.Press the Enter key
6.Press the Advanced button
7.Press the Data 1 key
8.Enter the Program Change number, for example 42
9.Press the Enter key
10.Press the Advanced button
11.Press the Data 2 key
12.Enter the Bank LSB number, for example 8
13.Press the Enter key
14.Press the Advanced button
15.Press the Data 3 key
16.Enter the Bank MSB number, for example 32
17.Press the Enter key
See Section 10 - MIDI Messaged Defined for an