M-Audio DCP-300 manual Using the Reverb Effect, Press the Reverb button

24 DCP-300 User Guide

Using the Reverb Effect

The built-in digital Reverb can be used for adding a natural-sounding room ambience to any of the 16 voices built into DCP-300.

‣

To apply Reverb to a voice:

Function

Press the Reverb button.

The button will illuminate, and you will hear the Reverb effect when you play the currently selected voice.

‣

	To turn Reverb off, press the Reverb button
	again. The button will go dark to indicate
REVERB	that Reverb is off.

To adjust the Reverb Depth (Reverb amount):

Function

REVERB

While holding the Reverb button, turn the Data Control knob to adjust the Reverb Depth setting.

The LCD will show the current Reverb Depth setting. The minimum setting is 0, and the maximum setting is 127.

✔Note: If you prefer, you may use the Tempo Up/Down buttons instead of the Data Control knob to change the Reverb Depth (while holding down the Reverb button).

Once you have reached the desired amount of Reverb, let go of the Reverb button, and resume playing DCP-300.