Manuals / M-Audio / Household Appliance / Home Security System

M-Audio DELTA 1010 manual Delta 1010 User Guide, Problem Repetitious looping Sound

Models: DELTA 1010

1 45

Download 45 pages 30.79 Kb

Page 39

Problem: Repetitious (looping) Sound.

Delta 1010 User Guide

39

Possible Cause 5: If you see visual activity on the Monitor Mixer’s VU meters, but your audio application’s input meters are not moving, then Delta 1010’s Patchbay/Router and/or your audio application may not be conﬁgured properly.

•Refer to the Patchbay/Router Tab section of this User Guide to learn more about how to conﬁgure Delta 1010’s Patchbay/Router.

•Refer to your software’s documentation to learn how to use Delta 1010 as its audio input/output device.

Possible Cause 6: Your audio outputs have been misrouted in the Control Panel. Check the Control Panel’s Patchbay/Router tab to verify the output routing assignments. Also, if you are monitoring the outputs of Delta 1010’s Monitor Mixer, make sure that the mixer’s faders, solo, and mute controls are set properly.

Problem: No visual activity on audio input VU meters of your audio software.

Possible Cause 1: Your software is not conﬁgured to use Delta 1010 as its audio interface. Make sure that Delta 1010 drivers are properly installed and verify that the audio application is conﬁgured to use Delta 1010. See your software’s documentation to learn how to do this.

Possible Cause 2: If your audio software is recording the output of the Delta 1010 Monitor Mixer, be sure that the mixer’s faders, solo and mute controls are set properly.

Possible Cause 3: Poor quality cabling. Verify that your audio cables are plugged in properly and are in good working order.

Problem: Repetitious (looping) Sound.

Possible Cause: An IRQ resource conﬂict. Often this will result in a small segment of sound (0.5 to 1 second) repeating itself endlessly, sometimes causing the computer to lock up. See the “No sound” troubleshooting section at the beginning of this section for tips on how to resolve system resource conﬂicts.

Image 39

M-Audio DELTA 1010 manual Delta 1010 User Guide, Problem Repetitious looping Sound

Contents

User Guide Table of Contents Introduction What’s in the Box?Delta 1010 User Guide Delta 1010 User Guide About the Delta Digital Recording SystemDelta 1010 User Guide Product Features & SpeciﬁcationsWindows Hardware Controls and IndicatorsMinimum System Requirements Rack Unit Front PanelDelta 1010 User Guide Rack Unit Back PanelDelta 1010 User Guide PCI Host Adapter CardDelta 1010 User Guide The PCI Host Adapter card and rack-mountportion of the interface are connected using a standard 25-pin “D-Sub”cable. This is the same type of “bidirectional printer cable” used to connect printers to the parallel port printer port of a computer. This type of cable is commonly available through computer and professional audio stores and M-Audiohas successfully tested Delta 1010 with cables up to 25 feet in length. If the supplied Host Cable is not long enough for optimal for computer/ interface placement, consider replacing the included cable with a longer oneDelta 1010 User Guide Delta System OverviewAnalog Inputs/Outputs The Digital Monitor MixerThe Patchbay / Router SynchronizationDelta 1010 User Guide Using Delta 1010 with your Audio Software Audio InputsDelta 1010 User Guide Corresponding Outputs Audio OutputsDelta 1010 User Guide Display NameDelta 1010 User Guide Control Panel SoftwareDelta Control Panel for Windows XP Monitor Mixer TabDelta 1010 User Guide Monitor Mixer is the ﬁrst tab that appears when the Control Panel is opened. This tab controls the digital mixer built into the Delta 1010 PCI Host Adapter card and has the following controls and indicatorsDelta 1010 User Guide Delta 1010 User Guide Patchbay/Router TabDelta 1010 User Guide Hardware Settings TabIf you have connected a Word Clock device to your Delta 1010 and would like to use that device’s clock as the master clock source, select Word Clock as the source of Delta 1010’s master clock. This will slave Delta 1010 to the external word clock device’s clock Delta 1010 User GuideDelta 1010 User Guide Delta 1010 User Guide Multiple Card Sync If you are using multiple Delta cards in one system, this option allows you to synchronize all cards to the same master clock through the computer’s PCI bussDelta 1010 User Guide S/PDIF TabDIGITAL INPUT This section of the Control Panel displays the current S/PDIF input status Delta 1010 User GuideDelta 1010 User Guide Delta 1010 User Guide Bass Management TabAdditional Control Panel Features About TabDelta 1010 User Guide Control Panel Software for Mac OS Monitor Mixer TabDelta 1010 User Guide Delta 1010 User Guide Delta 1010 User Guide MASTER VOLUME The Master Volume section is found to the left of the Mixer Input section. These meters control the overall output level of the Monitor Mixer. The adjacent VU meters indicate the Monitor Mixer’s output levels and are “post- fader.” This means changes to the master fader will affect the levels displayed on the VU metersDelta 1010 User Guide Patch Bay TabDelta 1010 User Guide Hardware Settings TabDelta 1010 User Guide Delta 1010 User Guide S/PDIF TabDelta 1010 User Guide OUTPUT FORMAT CONSUMER - ADVANCED SETTINGSDelta 1010 User Guide OUTPUT FORMAT PROFESSIONAL - ADVANCED SETTINGSAdditional Control Panel Features About TabDelta 1010 User Guide Delta 1010 User Guide Troubleshooting Problem No soundDelta 1010 User Guide Delta 1010 User Guide Problem Repetitious looping SoundDelta 1010 User Guide Digital Audio Technical SpeciﬁcationsDelta 1010 User Guide Analog AudioDelta 1010 User Guide Technical InfoAppendix Appendix A ClockingDelta 1010 User Guide Delta 1010 User Guide Warranty Terms and RegistrationWarranty Terms Warranty Registration070208 Delta1010 UG EN01