Delta 1010 User Guide | 27 |
<H/W INSTALLED: Up to four Delta 1010 PCI Host Adapter cards may be installed in a PC at one time. This section displays all installed Delta cards, and allows you to select which card’s settings you would like to edit with the Control Panel software. To select a card for configuration, click its corresponding radio button in the “H/W Installed” list. Note that if you have installed multiple Delta cards in one system, you must synchronize the cards. To learn more about this, refer to the MultiTrack Driver Devices description on the Hardware Settings Tab section of this chapter. For additional information about
Control Panel Software for Mac OS X
10
Delta 1010 is a powerful audio interface with a variety of options and parameters relating to its operation. After installing the Delta 1010 drivers, you can use the Control Panel software to configure the various parameters of the interface. Since the appearance and functionality of the Control Panel varies slightly between Windows XP
and Mac OS X, each operating system is covered separately.
This section covers the Control Panel for Mac OS X users. Windows XP users should read the previous section of this User Guide to learn about the Windows XP Control Panel.
The Mac OS X Control Panel can be accessed by
Monitor Mixer Tab
In order to hear your Monitor Mix, you first need to route the Monitor Mixer’s output signal to Delta 1010’s analog outputs 1/2 or to its S/PDIF output. This is done by selecting “Monitor Mixer” from the Analog Out 1/2 or S/PDIF Out column in the Patch Bay tab.