Delta 1010 User Guide | 17 |
<MUTE: Every Monitor Mixer channel has a “Mute” checkbox. When this box is checked, its associated channel will not be routed to the stereo output and will not be heard in the monitor mix. When the box is unchecked, its associated channel will be routed to the mixer’s output.
<STEREO LINK: All of the Monitor Mixer’s channel pairs have a “Stereo Link” checkbox. When this box is checked, the left/right faders move together so that the channels may be adjusted as a stereo pair. When this box is unchecked, the faders can be adjusted independently.
Patchbay/Router Tab
Each column in the Patchbay/Router tab represents a physical output pair on your Delta 1010 interface. The radio buttons in each column allow you to select the audio source for that physical ouput.
To use the Patchbay/Router, first locate the Delta 1010 output that you’d like to
Next, click the radio button for the input source you’d like to connect to your chosen output. The available options listed in the column below each output. Delta 1010 will now route that audio source to your selected output.
The input sources are described below:
<WavOut 1/2 through 7/8: These inputs correspond to the outputs of your audio software.
<Monitor Mixer: This input corresponds to the output of the Delta 1010 Monitor Mixer. This audio source can only be routed to analog outputs