Manuals / M-Audio / Household Appliance / Home Security System

M-Audio DELTA 1010 manual Troubleshooting, Problem No sound, Delta 1010 User Guide

Models: DELTA 1010

1 45

Download 45 pages 30.79 Kb

Page 38

38	Delta 1010 User Guide

Troubleshooting

11

Problem: No sound.

Possible Cause 1: Improper connection to external devices. Verify that the analog outputs of Delta 1010 are properly connected to the inputs of an appropriate device (such as a mixer, ampliﬁer, or powered monitors) using quality cables. If you are connecting digitally to a digital device such as a DAT recorder or digital mixer, make sure you are using proper digital cables and that the device is conﬁgured to receive signals from Delta 1010.

Possible Cause 2: The Delta 1010 device drivers are not properly installed. See the installation instructions in the printed Delta 1010 Quick Start Guide for further information.

Possible Cause 3: There is a resource conﬂict between Delta 1010 and another device in your computer. Try the following to see if the issue resolves:

a.Move the PCI Host Adapter card to a different PCI slot.

b.Remove other PCI cards from your system one at a time to see if the resource conﬂict can be traced to speciﬁc PCI slot or card in your system.

c.If your computer includes a built-in sound card, turn it off. This is usually done through the system BIOS or by changing a hardware jumper on the motherboard. See your computer’s documentation for more information about this.

If these steps do not resolve your problems, please see the Support > Knowledge Base page on www.m-audio.com for additional information.

Possible Cause 4: If the rack-mount box is connected to the PCI Host Adapter Card and your computer is powered on, but the Power LED is not illuminated, shut down your computer and double-check that the host cable is connected properly.

Image 38

M-Audio DELTA 1010 manual Troubleshooting, Problem No sound, Delta 1010 User Guide

Contents

User Guide Table of Contents Delta 1010 User Guide IntroductionWhat’s in the Box? About the Delta Digital Recording System Delta 1010 User GuideProduct Features & Speciﬁcations Delta 1010 User GuideRack Unit Front Panel Hardware Controls and IndicatorsMinimum System Requirements WindowsRack Unit Back Panel Delta 1010 User GuidePCI Host Adapter Card Delta 1010 User GuideThe PCI Host Adapter card and rack-mountportion of the interface are connected using a standard 25-pin “D-Sub”cable. This is the same type of “bidirectional printer cable” used to connect printers to the parallel port printer port of a computer. This type of cable is commonly available through computer and professional audio stores and M-Audiohas successfully tested Delta 1010 with cables up to 25 feet in length. If the supplied Host Cable is not long enough for optimal for computer/ interface placement, consider replacing the included cable with a longer one Delta 1010 User GuideThe Digital Monitor Mixer Delta System OverviewAnalog Inputs/Outputs Delta 1010 User GuideDelta 1010 User Guide The Patchbay / RouterSynchronization Delta 1010 User Guide Using Delta 1010 with your Audio SoftwareAudio Inputs Display Name Audio OutputsDelta 1010 User Guide Corresponding OutputsMonitor Mixer Tab Control Panel SoftwareDelta Control Panel for Windows XP Delta 1010 User GuideMonitor Mixer is the ﬁrst tab that appears when the Control Panel is opened. This tab controls the digital mixer built into the Delta 1010 PCI Host Adapter card and has the following controls and indicators Delta 1010 User GuideDelta 1010 User Guide Patchbay/Router Tab Delta 1010 User GuideHardware Settings Tab Delta 1010 User GuideDelta 1010 User Guide If you have connected a Word Clock device to your Delta 1010 and would like to use that device’s clock as the master clock source, select Word Clock as the source of Delta 1010’s master clock. This will slave Delta 1010 to the external word clock device’s clockDelta 1010 User Guide Multiple Card Sync If you are using multiple Delta cards in one system, this option allows you to synchronize all cards to the same master clock through the computer’s PCI buss Delta 1010 User GuideS/PDIF Tab Delta 1010 User GuideDelta 1010 User Guide DIGITAL INPUT This section of the Control Panel displays the current S/PDIF input statusDelta 1010 User Guide Bass Management Tab Delta 1010 User GuideDelta 1010 User Guide Additional Control Panel FeaturesAbout Tab Delta 1010 User Guide Control Panel Software for Mac OSMonitor Mixer Tab Delta 1010 User Guide MASTER VOLUME The Master Volume section is found to the left of the Mixer Input section. These meters control the overall output level of the Monitor Mixer. The adjacent VU meters indicate the Monitor Mixer’s output levels and are “post- fader.” This means changes to the master fader will affect the levels displayed on the VU meters Delta 1010 User GuidePatch Bay Tab Delta 1010 User GuideHardware Settings Tab Delta 1010 User GuideDelta 1010 User Guide S/PDIF Tab Delta 1010 User GuideOUTPUT FORMAT CONSUMER - ADVANCED SETTINGS Delta 1010 User GuideOUTPUT FORMAT PROFESSIONAL - ADVANCED SETTINGS Delta 1010 User GuideDelta 1010 User Guide Additional Control Panel FeaturesAbout Tab Delta 1010 User Guide Delta 1010 User Guide TroubleshootingProblem No sound Problem Repetitious looping Sound Delta 1010 User GuideDelta 1010 User Guide Analog Audio Technical SpeciﬁcationsDelta 1010 User Guide Digital AudioTechnical Info Delta 1010 User GuideDelta 1010 User Guide AppendixAppendix A Clocking Warranty Registration Warranty Terms and RegistrationWarranty Terms Delta 1010 User Guide070208 Delta1010 UG EN01