Mabe Canada JGBP86 installation instructions Using the oven controls. on some models

Using the oven controls. (on some models) ge.com

Throughout this manual, features and appearance may vary from your model.

(on models with number pads only)

Oven Control, Clock and Timer Features

BAKE Pad	COOKING TIME Pad
Touch this pad to select the bake function.	Touch this pad and then touch the number
BROIL HI/LO Pad	pads to set the amount of time you want your
	food to cook. The oven will shut off when the
Touch this pad to select the broil function.
	cooking time has run out.

Safety Instructions Operating Instructions Installation

Display

Shows the time of day, oven temperature, whether the oven is in the bake, broil or self-cleaning mode and the times set for the timer or automatic oven operations. On some models, it will also show warming drawer settings.

If “F– and a number or letter” flash in the display and the oven control signals, this indicates a function error code.

If your oven was set for a timed oven operation and

a power outage occurred, the clock and all programmed functions must be reset.

The time of day will flash in the display when there has been a power outage. Reset the clock.

If “Err” appears in the display, you have tried to set a time or temperature outside of the control’s limits. Touch CLEAR/OFF pad and enter a new setting.

On models with an oven door latch, if the function error code appears during the self-cleaning cycle, check the oven door latch. The latch handle may have been moved, even if only slightly, from the latched position. Make sure the latch is moved to the right as far as it will go.

Touch the CLEAR/OFF pad. Allow oven to cool for one hour. Put oven back into operation. If function error code repeats, disconnect power to range and call for service.

CLEAR/OFF Pad

Touch this pad to cancel ALL oven operations except the clock and timer, and warming drawer settings.

DELAY START Pad

Use along with COOKING TIME or SELF CLEAN pads to set the oven to start and stop automatically at a time you set.

OVEN LIGHT Pad

Touch this pad to turn the oven light on or off.

TIMER/CLOCK Pad

Touch this pad to select the timer feature.

Touch and hold this pad, until the display changes, to set the clock.

START Pad

Must be touched to start any cooking or cleaning function, and warming drawer settings (on some models).

Number Pads

Use to set any function requiring numbers such as time of day on the clock, timer, oven temperature, internal food temperature, start time and length of operation for timed baking and self-cleaning.

WARMING DRAWER Pad (on some models)

Touch this pad and then touch number pads 1–3 to use the warming drawer. See the Using the electric warming drawer section.

SELF CLEAN Pad

Touch this pad to select self-cleaning
function. See the Using the self-cleaning	11
oven section.

Instructions Troubleshooting Tips Consumer Support