Installation Instructions

3ELECTRICAL CONNECTIONS (CONT.)

B. Usage Situations where Appliance Power Cord will be Disconnected Frequently.

Do not use an adapter plug in these situations because disconnecting of the power cord places undue strain on the adapter and leads to eventual failure of the adapter ground terminal. The customer should have the two- prong wall receptacle replaced with a three-prong (grounding) receptacle by a qualified electrician before using the appliance.

The installation of appliances designed for mobile home installation must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part

5ASSEMBLE SURFACE BURNERS

(CONT.)

Make sure the slot in the burner head is positioned over the electrode.

Electrode Slot

BOval (Center) Burner Head/Cap Assembly

Place the oval (center) head/cap assembly over the electrode on the cooktop.

280)or, when such standard is not applicable, the Standard for Manufactured Home Installations, latest edition (Manufactured Home Sites, Communities and Set-Ups), ANSI A225.1, latest edition, or with local codes. In Canada, mobile home installation must be in accordance with the current CAN/CSA Z240/MH Mobile Home Installation Code.

Electric Disconnect

Locate disconnect plug on the range back.

Pinch sides of connector and pull out of range back.

Oval head and cap

assembly

Front of range

CCaps

Make sure the slot in the burner head is positioned over the electrode.

Slot

Electrode

4SEAL THE OPENINGS

Seal any openings in the wall behind the range and in the floor under the range when hookups are completed.

5ASSEMBLE SURFACE BURNERS

ABurner Heads (on some models)

Place burner heads over the electrodes on the cooktop, in the correct locations according to their size. There is one small, one medium, one large and one extra large burner head.

Medium head

 

Small head

 

Large head

 

 

 

 

 

 

 

 

 

 

 

Extra large head

 

 

Front of range

 

 

 

 

 

 

 

 

 

 

 

 

50

Place the matching size caps onto the burner bases or heads.

Medium cap

Small cap

Large cap

 

 

 

 

 

 

 

 

 

Extra large cap

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Front of range

Make sure that the heads (on some models) and caps are replaced in the correct locations.

DGrates

Place the left, right and center grates on the cooktop. These grates are position specific. The undersides of the left and right grates are marked “LEFT FRONT” and “RIGHT FRONT.” Place the middle grate with its bowed front toward the front of the range.

Left Front

Center Right Front

CAUTION: Do not operate the burner without all burner parts in place.

Page 50
Image 50
Mabe Canada JGBP86 installation instructions Assemble Surface Burners, Seal the Openings