7.Select the “Next” command and the driver software will begin installing.

8.When Windows presents you with a warning about the software not having passed Windows testing, select “Continue Anyway.”

9.Repeat steps 3-8 to allow a second driver to be installed. The found new hardware box will appear all over again, so follow these steps and you are almost done.

10.The following message confirms that the new software has been installed successfully and that the found new hardware wizard is complete.

11.Pack yourself a big lunch and go for a nice walk outside. Have a picnic and lie back and dream. Things are going to be so good now.

The audio interface is now ready to use with the Digital Audio Workstation software of your dreams, as well as with consumer audio applications such as iTunes® or Windows Media Player.

A Note on Available Buffer Sizes

In general, you should always experiment with the available buffer sizes, to find the lowest buffer size that the machine and recording project can comfortably work with.

36Onyx 1220i