Appendix C: Technical Information
Specifications
1604
(20
Main Mix fader unity, channel faders down: |
(92 dB Signal to Noise Ratio, ref +4 dBu)
Main Mix fader unity, channel faders @ unity:
Mic in: | 2.5 kilohms |
Channel Insert return: | 2.5 kilohms |
All other inputs: | 10 kilohms or greater |
Tape out: | 1.1 kilohms |
All other outputs: | 120 ohms |
Total Harmonic Distortion (THD) |
|
| EQ |
|
|
| High Shelving | ±15 dB @ 12 kHz | |
(1 kHz 35 dB gain, 20 |
|
| ||
|
| Mid Peaking | ±15 dB sweep 100 | |
Mic in to insert send: | <0.0007% |
| ||
| Low Shelving | ±15 dB @ 80 Hz | ||
Mic in to Main Out: | <0.005% |
| ||
| Low Cut Filter | 18 dB/octave, | ||
|
|
|
(1 kHz relative to 0 dBu, 20
Channel Mute switch engaged: | |
Channel Gain knob down: |
Frequency Response (Mic input to any output.)
20 | Hz to 60 kHz: | +0 |
20 | Hz to 100 kHz: | +0 |
(Mic in to Insert Send out, max gain.)
150 ohm termination:–129.5 dBu
Common Mode Rejection Ratio (CMRR) (Mic in to Insert Send out, max gain.)
1 kHz:better than
Mic in: | +22 dBu |
All other inputs: | +22 dBu |
Main Mix TRS out: | +28 dBu |
All other outputs: | +22 dBu |
| 120 VAC, 50/60 Hz, 50 watts |
Fuse Ratings |
|
|
|
1A Slo Blo, 5 x 20 mm | |
0.5A Slo Blo, 5 x 20 mm |
17.5" x 17.3" x 5.1" (445 mm x 440 mm x 129 mm)
Weight20.0 lb (9.1 kg)
LOUD Technologies Inc. is always striving to improve our products by incorporating new and improved materials, components, and manufacturing methods. Therefore, we reserve the right to change these specifications at any time without notice.
“Mackie,” and the “Running Man” are registered trademarks of LOUD Technologies Inc. All other brand names mentioned are trademarks or registered trademarks of their respective hold- ers, and are hereby acknowledged.
The technical writer responsible for this manual tends to fade in and out of various different realities, depending on how many cups of tea he has had. Please check our website for any updates to this manual: www.mackie.com.
©2007 LOUD Technologies Inc. All Rights Reserved.