
panel should be the same as the buffer size selected in the Onyx 400F Console.
Note: If you change the buffer size in the ASIO control panel, you may need to close and reopen the Onyx 400F Console to update the buffer setting.
About
This opens a box that tells you about the Onyx 400F Console Control Panel.
Version Information
These let you know the version of the Console soft- ware, the version of the firmware currently installed in the Onyx 400F, the 1394 (FireWire) driver version and the ASIO driver version currently installed on the computer.
Software and firmware updates are installed using an installer that you can download from our website. Check our website (www.mackie.com/updates/400F) to see if newer versions of the software and firmware are available to download. Better yet, make sure you register your 400F either online or with the enclosed Product Registration Card, and we will notify you by email when updates become available.
Save/Load
The Save button allows you to save the current state of the Onyx 400F Console as a preset file that can be recalled at a later time. When you click the Save button, a dialog box opens that allows you to name the file and select the destination.
The Load button allows you to recall a preset file. When you click the Load button, a dialog box opens that allows you to select from a list of presets.
The name of the current preset appears in the “Pro- gram” box next to the Save/Load buttons.
Standalone Mode: When the Console
software application is closed, the
Onyx 400F continues to operate with
whatever settings were present when
the Console was closed. When the Onyx 400F is turned off, the current
settings are saved to its internal flash memory, and recalled when the 400F is turned back on (program name: Flash Settings).
This allows you to setup the Onyx 400F for a particular application, such as a
Manual Owner’s
|
|
Owner’s Manual | 25 |
|
|