2.4.3Step 2: Configure IEEE 802.11 Settings
Fig. 6. IEEE 802.11b communication settings.
Go to the IEEE 802.11, Communication section to configure IEEE
The number of available RF channels depends on local regulations; therefore you have to choose an appropriate regulatory domain to comply with local regulations. The SSID of a wireless client computer and the SSID of the advanced AP must be identical for them to communicate with each other.
When you are finished, click Save at the bottom of this page, and then you are brought back to the start page.
NOTE: The factory default setting for the Regulatory Domain is “Spain”. This is because in Spain only channels 10 and 11 are authorised for use. Thus an AP “out of the box” will only transmit on channels 10 and 11 and this ensures compliance with international regulations. When the default Regulatory domain is changed the AP will use an expanded set of channels.
2.4.4Step 3: Review and Apply Settings
Fig. 7. Settings changes are highlighted in red.
Copyright © 2002 Madge Networks. All rights reserved. | Page 6 |