Advanced. Advanced settings of the advanced AP.
Management. UPnP and SNMP settings.
Fig. 9. Save, Save & Restart, and Cancel.
At the bottom of each page, there are up to three buttons—Save, Save & Restart, and Cancel. Clicking Save stores the settings changes to the memory of the advanced AP and brings the user back to the start page. Clicking Save& Restart stores the settings changes to the memory of the advanced AP and restarts the advanced AP immediately for the settings changes to take effect. Clicking Cancel discards any settings changes and brings the user back to the start page.
If the user clicks Save, the start page will reflect the fact that the configuration settings have been changed by showing two buttons—Restartand Cancel. In addition, changes are highlighted in red. Clicking Cancel discards all the changes. Clicking Restart restarts the advanced AP for the settings changes to take effect.
Fig. 10. Settings have been changed.
100-408-01 | Copyright © 2002 Madge Networks. All rights reserved. | Page 10 |