3.2General Operations
3.2.1Changing Password
Fig. 11. Password.
On this page, the user could change the password for the right to modify the configuration of the advanced AP. The new password must be typed twice for confirmation.
3.2.2Upgrading Firmware
Fig. 12. Firmware Upgrade.
The advanced AP can be triggered to download updated firmware from a specified TFTP server. On this page, the user specifies the IP address of the intended TFTP server, and then triggers the advanced AP to begin downloading.
Within the folder “AP\Utilities” on the companion
(TftpSrvr.exe) for firmware upgrade. Run this program on the computer that is to serve as a TFTP server.
To upgrade the firmware of advanced AP:
1.Get a computer that will be used both as a TFTP server and as a managing computer to trigger the upgrade process.
2.Connect the computer and the AP’s LAN/Config Ethernet port with a crossover Ethernet cable.
3.Configure the computer with a static IP address that is compatible with the IP address of the AP.
4.On the computer, run the TFTP Server utility. And specify the folder in which the firmware files reside.
5.On the computer, run a Web browser and connect to the AP. On the AP’s Home Page click the General/Firmware Upgrade hyperlink.
6.Specify the IP address of the computer, which acts as a TFTP server. If you don't know the IP address of the computer, open a Command Prompt, and type IpConfig, then press the Enter key.
7.Trigger the firmware upgrade process by clicking Upgrade.
Copyright © 2002 Madge Networks. All rights reserved. | Page 11 |