Installation
MKG Series Gas Griddle
1. Installation Section
1.1.Checking Your New Griddle
Your new griddle has been carefully packed into one crate. Every effort has been made to ensure that your new griddle is delivered to you in perfect condition. As you unpack your new appliance, inspect each of the pieces for damage. If something is damaged, Contact the shipper immediately; the shipper is only responsible for 15 days after delivery. Check the packing list enclosed with your griddle to ensure that you have received all the parts to the griddle. If you are missing any parts, contact the dealer from whom the griddle was purchased.
In the provided spaces on the cover of this manual, fill in the Model No., Serial No., and the date the appliance was purchased. The Information is located on the Data plate on the inside cabinet wall, see Figure 1 below. Keep this information in a safe place so it can be referred to in the future.
REMOVE GREASE BOX
DATA PLATE
ON INSIDE WALL
FIGURE 1
1.2.Installation Clearances
Your new MagiKitch’n Griddle needs clearance around it for proper operation. Adequate clearances allow for servicing and proper burner operation. The clearances shown below are for installation in combustible and
Location | Combustible Construction | |
| Inches (Centimeters) | Inches (Centimeters) |
Cabinet back | 8.0 (20.4) | 8.0 (20.4) |
Cabinet Sides | 2.0 (5.0) | 0.0 (0.0) |
Ensure that all clearances stated on the Data plate and in the clearance section of this manual are strictly followed.
1.3.Gas Connection(s)
Your gas appliance will give you peak performance when the gas supply line is of sufficient size to provide the correct gas pressure. The gas line must be installed to meet the local building codes or National Fuel Gas Code ANSI Z223.1 Latest Edition. In Canada, install the appliance in accordance with
4 |
