M A G M A
For example, below is showing the Magma Chassis on Bus 7, Device 0, Function 0. Some information has been deleted, but notice the Link Supported Speed is 2.5 Gb/s, Width x8 . This is helpful to know that the chassis is configured for x8 PCI Express Speeds highlighted in red.
07:00.0 PCI bridge: Integrated Device Technology, Inc. Unknown device 8037
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
Latency: 0, Cache Line Size: 64 bytes
Device: MaxPayload 256 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s L1, Port 0
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x8
Capabilities: [c0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
Status: D0
Capabilities: [100] Advanced Error Reporting
Capabilities: [200] Virtual Channel
IMPORTANT ORDER OF PCI EXPRESS SLOTS
The PHYSICAL PCI Express Slots 1 – 7 are not in order when displayed in any Operating Systems Device information.
Mapping Physical Slot locationsto port locations using lspci
How do you locate your PCI Express Devices in our Magma Chassis? And how does that correspond to physical slot locations?
Below is an example of 7 PCI Express Downstream Ports in our Magma Chassis. This output comes from lspci
17