Remove all of these screws in order to open the enclosure.

M A G M A

Remove all of these screws in order to open the enclosure.

Slide the enclosure cover backward to disengage it from the guides at the front of the enclosure by firmly grasping the edges of the cover lip and pulling the cover backward about 1” until it clears the front hold- down, and then lift the cover off.

Be careful to store the cover to avoid damage while you are working inside the chassis.

CAUTION

When replacing the enclosure cover, be sure that the front edge of the cover slides completely under the front lip of the enclosure.

21

Page 31
Image 31
Magma EBU, EB7R-x8, EB7-x8 user manual Remove all of these screws in order to open the enclosure