To replace the AIO-8 cards with different I/O cards:1.If the MDR24/96 is plugged into AC power, unplug it.

2.Unscrew the thumbscrews at the top and bottom of each I/O card to be removed. Grasp one thumbscrew with each hand and gently pull the card out.

ANALOG I/O ANALOG I/O ANALOG I/O

OUTPUT

OUTPUT

OUTPUT

 

 

M

INPUT

INPUT

INPUT

TAPE IN/OUTS

3.Before you take I/O cards from their bags, touch a grounded metal object to discharge any static electricity from your body.

4.Remove the new I/O card from its anti-static bag and put the I/O card you just removed from the MDR24/96 into the bag.

5.Hold the new card so the component side faces left and line up the top and bottom

edges with the white card guides. Push the

card all the way into the slot until its faceplate is flush with the back panel.

6.Hand-tighten the thumbscrews at the top and bottom of the card. Do not use a screwdriver.

If you want to hook up the MDR24/96 I/O cables to your console right now, see the console hookup diagrams in Hookups. Be sure to come right back here when you’re done.

Note: Always hand tighten the thumbscrews at the top and bottom of all I/O cards before operating the MDR 24/96.

Start Quick Guide

 

 

Quick Start Guide

9