CLEANING AND CARE
1.Turn off the oven and remove the power plug from the wall socket before cleaning.
2.Keep the inside of the oven clean. When food splatters or spilled liquids adhere to oven walls, wipe with a damp cloth. Mild detergent may be used if the oven gets very dirty. Avoid the use of spray and other harsh cleaners as they may stain, streak or dull the door surface.
3.The outside surfaces should be cleaned with a damp cloth. To prevent damage to the operating parts inside the oven, water should not be allowed to seep into the ventilation openings.
4.Wipe the door and window on both sides, the door seals and adjacent parts frequently with a damp cloth to remove any spills or spatters. Do not use abrasive cleaner.
5.Do not allow the control panel to become wet. Clean with a soft, damp cloth. When cleaning the control panel, leave oven door open to prevent oven from accidentally turning on.
6.If steam accumulates inside or around the outside of the oven door, wipe with a soft cloth. This may occur when the microwave oven is operated under high humidity condition and this is normal.
7.It is occasionally necessary to remove the glass tray for cleaning. Wash the tray in warm sudsy water or in a dishwasher.
8.The roller ring and oven floor should be cleaned regularly to avoid excessive noise. Simply wipe the bottom surface of the oven with mild detergent. The roller ring may be washed in mild sudsy water or dishwasher. When removing the roller ring from cavity floor for cleaning, be sure to put it back in the proper position.
9.Remove odors from your oven by combining a cup of water with the juice and skin of one lemon in a deep microwaveable bowl, microwave for 5 minutes. Wipe cavity thoroughly and dry with a soft cloth.
10.When it becomes necessary to replace the oven light, please consult a dealer to have it replaced.
11.The Rotisserie rack must be cleaned after each use with a damp cloth; a mild detergent may be used if the rack is very dirty
12.DO NOT clean the bottom heating element until you have unplugged the product for at least an hour after using it and have made sure that it has completely cooled off. You can remove the metal turning plate by pushing it upwards and thereby moving it off of the shaft. Now you can take the heating element and push it upwards (at the front only) to make it easier to clean. Use a damp cloth and wipe the heating element with a mild detergent or purified water (that doesn’t contain minerals). Do not forget to put the metal turning plate back onto the shaft once the heating element is dry.
13
