GB
OPERATIONAL ELEMENTS AND CONNECTIONS – FRONT PANEL
16 | 15 | 14 | 13 | 12 |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
1 Power
Switches the device on when it is in the standby mode. If the LED does not illuminate, actuate the power switch located on the rear of the device. Conversely the device can be switched from power operation to the standby mode.
2 Input selector switch
Used for selecting the input source (CD, TUNER, PHONO, TAPE, AUX, LINE). This is indicated on the display (15) briefly.
3 Eject
Opens or closes the CD compartment.
4 Play/Pause CD
Starts or pauses the playback from a CD.
5 Stop/Memory
CD operation: Stops a CD that is playing.
Radio operation: Opens the internal memory for the station presets.
6, 7 Search/Auto tuning
CD operation: Briefly pressing this button activates the search function (forwards/backwards); pressing the button again will stop the search function. Radio operation:
Brief press: Changes the receiving frequency in 50kHz increments (manual station search)
Press and hold: Searches for the next station on the selected band (automatic station search)
8 FM/AM
Switches between FM stereo, FM mono and AM (only mono).
9 Tone/Skip/Balance/Preset
CD operation: Turning the knob selects the next and previous tracks.
Radio operation: Turning the knob calls up the station presets.
The bass, treble and balance can be adjusted by pressing the knob (display: BASS, TREBLE, L/R). The respective
setting can be adjusted by turning the knob. DSM (Direct Sound Mode) can also be switched on, which deactivates any sound settings.
10
3.5mm stereo input jack for an auxiliary audio device (e.g. MP3 player, etc.).
11 Headphones
3.5mm stereo output jack for headphones. The speakers are deactivated when this jack is used. Set the volume to a low level when connecting headphones.
12 Volume knob
Adjusts the volume. The knob needs to be turned through approximately two revolutions to alternate between minimum and maximum volume. The volume is shown on the display (15). (VOL 00 - VOL 40/max)
13Sensor for the remote control Please aim at this sensor when using the remote control.
14CD compartment
Insert the CD into the compartment with the label facing upwards.
15 Display
Displays the settings you have made.
16 SACD display
Indicates whether an SACD has been inserted.
13
