Magnavox 13MT1432/17, 13MT1433/17 user manual Auto Program Setting TV Channels, Helpful Hints

9

Auto Program (Setting TV Channels)

Your TV can set itself for local area (or

Cable TV) channels. This makes it easy for you to select only the TV stations in your area when you press CH +/-. Connect an Antenna or Cable TV signal before starting AUTO PROGRAM. Details are on panels 1-2.

1Press MENU to see the menu.

Press 8 or 9 to scroll through
2the menu until SETUP is high-		7 8 9
lighted.		VOL+
Press : to enter the SETUP
3menu.	6	EXIT

4Press 8 or 9 to scroll through the SETUP menu until AUTO PROGRAM is highlighted.

5Press : to start scanning and memorizing channels.

When Auto Programming is complete, CHANNELS ARE SET will appear on the screen. Then the SETUP menu will reappear briefly.

6Press STATUS/EXIT to remove the on-screen menu.

Helpful Hints

Press the CH +/- buttons to see which channels are in the TV’s memory.

To delete unwanted channels from the TV’s memory, see CHANNEL EDIT on panel 10.