Vivotek IP8352 manual PTZ > PTZ settings, Digital PTZ Operation E-PTZOperation

VIVOTEK

PTZ > PTZ settings

Advanced Mode

This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation� This panel only works when a streaming view is not showing the full of the camera’s largest frame size� For example, when showing a 800x600 frame out of the 1280x1024 full frame�

Digital: Control the e-PTZ operation� It allows users to quickly move the focus to a pre- configured target area for close-up viewing without physically zooming the camera.

Digital PTZ Operation (E-PTZ Operation)

If you select “Digital“, the e-PTZ control settings section will be displayed as shown below:

2010/12/10 17:08:56

Select stream: Select one of the streams from 1 and 2 to set up the e-PTZ control� Please note that each stream can be set up with its own preset and patrol settings� Refer to the following page for details about how to set up preset and patrol settings�

Auto pan/patrol speed: Select the speed from 1~5 (slow/fast) to set up the Auto pan/patrol speed control� When completed with the settings of e-PTZ, click Save to enable the settings on this page�

82 - User's Manual