Vivotek IP8352 manual Event name: Enter a name for the event setting

VIVOTEK

■Event name: Enter a name for the event setting�

■Enable this event: Select this option to enable the event setting�

■Priority: Select the relative importance of this event (High, Normal, or Low)� Events with a higher priority setting will be executed first.

■Detect next event after seconds: Enter the duration in seconds to pause motion detection after a motion is detected�

Follow the steps 1~3 to arrange the three elements each by a mouse click on its blue text -- Schedule, Trigger, and Action to set an event. A total of 3 event settings can be configured.

1� Schedule

Specify the period for the event to apply� Please select the days of the week and the time in a day (in 24- hr time format) to specify when will the event-triggering conditions take effect�

2� Trigger

This is the cause or stimulus which defines what will trigger the event. The trigger source can be config- ured to use the Network Camera’s built-in motion detection mechanism or external digital inputs�

There are several choices of trigger sources as shown on next page� Select each item to display its related options�

■ Video motion detection

This option makes use of the built-in motion detection mechanism as a trigger source� To enable this function, you need to configure a Motion Detection Window first. For more information, please refer to Motion Detection on page 98 for details�

■ Periodically

This option allows the Network Camera to trigger periodically for every other defined minute. Up to 999 minutes are allowed�

■ Digital input

This option allows the Network Camera to use an external digital input device or sensor as a trigger source� Depending on your application, there are many choices with digital input devices on the market which help detect changes in temperature, vibration, sound, light, etc�

■ System boot

This option triggers the Network Camera when the power to the Network Camera is disconnected�

■ Recording notify

This option allows the Network Camera to trigger when the recording disk is full or when recording starts to overwrite older data�

86 - User's Manual