Vivotek IP8352 manual Image setting per channel, Vivotek, disableirled, <boolean>, enableextled

VIVOTEK

	schedule
daymodebegintime	00:00~23:59	6/6	Day mode begin time
daymodeendtime	00:00~23:59	6/6	Day mod end time
disableirled	<boolean>	6/6	Enable/disable built-in IR LED.
enableextled	<boolean>	6/6	Enable/disable External IR LED.
bwmode	<boolean>	6/6	Switch to B/W in night mode if enabled
sensitivity	low,	6/6	Sensitivity of light sensor
	normal,
	high

7.11 Image setting per channel

Group: image_c<0~(n-1)>for n channel products

NAME		VALUE		SECURITY		DESCRIPTION
				(get/set)
brightness	-5~5		4/4			Adjust brightness of image according to
						mode settings.
saturation	-5~5,100		4/4			Adjust saturation of image according to
						mode settings.
						100 for saturation percentage mode.
saturationpercent	0~100		4/4			Adjust saturation value of percentage
						when saturation=100
contrast	-5 ~ 5		4/4			Adjust contrast of image according to
						mode settings.
sharpness	-3~3,100		4/4			Adjust sharpness of image according to
					mode settings.
					100 for sharpness percentage mode.
sharpnesspercent	0~100		4/4			Adjust sharpness value of percentage
						when sharpness=100
gammacurve	0,45,50,60,70,		4/4			Gamma curve.
	80,90,100
lowlightmode	<boolean>		4/4			Enable/disable low light mode.
profile_i0_enable		<boolean>	4/4			Enable/disable this profile setting
profile_i0_policy		day,	4/4			The mode which the profile is applied to.
		night,
		schedule
profile_i0_begintime		hh:mm	4/4			Begin time of schedule mode.

User's Manual - 133