Vivotek IP8352 manual Media > Image, General settings

VIVOTEK

Media > Image

Advanced Mode

This section explains how to configure the image settings of the Network Camera� It is composed of the following four columns: General settings, Preference, Exposure, and Privacy mask�

General settings

Timestamp and video title: Enter a name that will be displayed on the title bar of the live video as the picture shown below�

Zoom factor: If you check this item, the zoom indicator will be displayed on the Home page when you zoom in/out the live viewing window as the picture shown below� You may zoom in/out the image by scrolling the mouse inside the live viewing window�

Video Title Title and Time

Video (TPC-AV)

Video 2011/03/13 17:08:56

Video orientation: Flip--vertically reflect the display of the live video; Mirror--horizontally reflect the display of the live video� Select both options if the Network Camera is installed upside-down (ex� on the ceiling) to correct the image orientation. Please note that the preset locations will be cleared after flip/mirror.

Color: Select to display color or black/white video streams�

Power line frequency: Set the power line frequency consistent with local utility settings to eliminate image flickering associated with fluorescent lights� Note that after the power line frequency is changed, you must disconnect and reconnect the power cord of the Network Camera in order for the new setting to take effect�

User's Manual - 69