COAXIAL
10 Digital Stereo Hookups
• You cannot use a Mini-Disc or
Digital Audio Tape deck to copy
5.1channel Dolby Digital sur-
round sound Discs.
•Discs recorded in Dolby Digital
should show this on the Disc or
case. If the Disc is not recorded
in 5.1channel Dolby Digital sur-
round sound,you will not hear
multi-channel sound even if you
use the Digital Stereo hookup.
You can connect the TV/DVD to a Stereo that
has a Digital Coaxial In jack. Use this hookup if
you want to hear the TV/DVD sound through
the Stereo instead. Use these connections for
a Dolby Digital-compatible Stereo or for a
Receiver that has a Mini-Disc or Digital Audio
Tape deck.
1Connect the antenna/Cable TV
signal as usual.See page eight.
2Connect a digital audio coaxial
cable (not supplied) to the orange
COAXIAL Out jack on the rear of
the TV/DVD.
Connect the same cable to the
Stereo’s COAXIAL DIGITAL
AUDIO IN jack.
3If the Stereo is Dolby Digital-com-
patible,set DOLBY DIGITAL to
ON. If the Stereo is not Dolby Digital-
compatible or if you connected to a
Mini-Disc or Digital Audio Tape Deck,
set DOLBY DIGITAL to OFF.
See page 41.
An incorrect setting causes noise distor-
tion and damages speakers.
To see if your Stereo has Dolby Digital,
look for a Dolby Digital logo on your
Stereo. Or, refer to the Stereo manual.
Digital Audio Coaxial cable
to orange
COAXIAL Out jack
on TV/DVD
To Stereo’s COAXIAL
DIGITAL AUDIO IN jack
Helpful Hints
20MC4204 04.2.25 9:33 PM Page 10