Setting V-Chip (cont’d) 23
If you enter the wrong code in the
CONFIRM CODE space,repeat
step 5.Enter the same new code
exactly in the CONFIRM CODE
space.
If the power fails,the default code
will be active again (0000).
Change your access code again as
necessary.
Helpful Hints

Changing the Access Code

Although the default code 0000 is supplied with the TV/DVD,
you can set your own access code.
Before you begin,press SELECT to put the TV/DVD
in TV mode.
1Press SETUP.
2Press or to select V-CHIP SET UP.
Then,press ENTER.
3Press the Number buttons to enter the old
access code.When doing this for the first time, use
0000.
4Press or to select CHANGE CODE.
Then,press ENTER.
5Press the Number buttons to enter your
desired access code in the NEW CODE space.
Then,enter the same code in the CONFIRM
CODE space.The V-CHIP SET UP screen will
reappear.
(Four Xs will appear on the screen instead of your
code.This protects the code’s identity.Your code must
have exactly four digits.)
6Press SETUP to save your settings and remove the
menus.
PREV NEXT
OPEN/CLOSE
2,43,5
1,6
ACCESS CODE
– – – –
– V-CHIP SET UP –
TV RATING
MPAA RATING
CHANGE CODE
B
NEW CODE
CONFIRM CODE
X X X X
20MC4204 04.2.25 9:33 PM Page 23