8 Hooking Up the TV/DVD
ANT.
IN
OUT
ANT.
Connect an RF
coaxial cable (not
supplied) to the
OUT Jack on the
Cable Box/
Satellite Receiver
and to the
ANT(enna) Jack
on the TV/DVD.
Connect a Cable TV
signal or an antenna to
the ANT(enna) Jack.
1Hook up your TV/DVD using one of
the connections shown.
AHooking Up Your TV/DVD with a
Cable TV Signal or Outdoor Antenna
Connect the Cable TV
or Satellite signal to the
IN Jack on the Cable
Box/Satellite Receiver.
BHooking Up Your TV/DVD with a
Cable Box/Satellite Receiver
To view any channel, set the TV/DVD to the
output channel (channel 03 or 04) of the Cable
Box/Satellite Receiver. Then,select channels at
the Cable Box/Satellite Receiver.
Your Cable Box/Satellite Receiver may have Audio and Video Out jacks instead of the single Antenna Out
jack (RF coaxial or 75 ohm) shown here.
If so,connect Audio and Video cables to the Audio/Video Out jacks of the Cable Box/Satellite Receiver
and to the AUDIO/VIDEO In jacks on the front of the TV/DVD.
Repeatedly press SELECT on the TV/DVD’s remote to set it to AUX,not channel 3 or 4. Select channels
you want to watch at the Cable Box/Satellite Receiver as usual,leaving the TV/DVD on AUX.
20MC4204 04.2.25 9:33 PM Page 8