Magnavox 27MS4504 user manual Using the AV1 in or AV2 in Input Jacks

4

USING THE AV1 IN OR AV2 IN (INPUT) JACKS

The TV’s audio/video input jacks are for direct picture and sound connections

between the TV and a VCR (or similar device) that has audio/video output jacks. Both the AV1 and AV2 Input Jack connec- tions are shown on this page, but either one can be connected alone. Follow the easy steps below to connect your accessory device to the AV1 and AV2 IN Jacks locat- ed on the back of the TV.

1Connect the VIDEO (yellow) cable to the VIDEO AV1 IN (or AV2 IN) jack on the back of the TV.

2Connect the AUDIO (red and white) cables to the AUDIO (left and right) AV1 IN (or AV2 in) jacks on the rear of the TV.

3Connect the VIDEO (yellow) cable to the VIDEO OUT jack on the back of the VCR (either one or two) or accessory device being used.

4Connect the AUDIO (red and white) cables to the AUDIO (left and right) OUT jacks on the rear of the VCR (either one or two) or accessory device being used.

5Turn the VCR (either one or two) or accessory device and the TV ON.

6Press the CH + or CH- buttons to set the TV to its AV1or AV2 channel. (Go to your lowest channel, for example channel 1, then change channels down to find the correct input.)

7With either of the VCRs (or acces- sory devices) ON and a prerecorded tape (CD, DVD, etc.) inserted, press the PLAY button to view the tape on the television.

HELPFUL HINT

Audio and video cables are not supplied with the TV, but are avail- able from Magnavox or electronics retailers.

Back of TV

1		3
Monitor out	V1 in	AV2 in

VIDEO

L/Mono

AUDIO

S-VIDEO

R

VIDEO

	AV1				2		4
Connection
		2
	ANT/CABLE	S-VIDEO	R	L	VIDEO	1
	OUT	OUT	AUDIO OUT		OUT
				Back of VCR
5 VCR One (or accessory					7
	device) (Equipped with Audio
	and Video Output Jacks)
							Video In
	AV2		Audio In				(Yellow)
Connection			(Red and
			White)
	ANT/CABLE	S-	R	L	VIDEO
	4		AUDIO OUT		OUT	3
5	VCR Two (or accessory				7
	device) (Equipped with

Video and Audio Output Jacks)