AUTOLOCK - BLOCKING CHANNELS
After you have set your personal access code (see previous page), you are now ready to select the channels you want to block.
Follow these steps for Digital Mode
Follow these steps for Analog Mode
1After Setting your personal access code (see previous
page), press CURSOR < or > until you
see Block Channel highlighted.
2Press CURSOR > to enter the Block Channel menu. Press CURSOR > or < to
Block or unBlock the channel.
3Press CURSOR < or > to highlight the
channel you wish to Block or Unblock
4Press CURSOR > or
<to select Block or
Unblock
5When fin ished, press MENU button on the
remote control three times to exit the menu from the TV screen.
Digital Mode
AutoLock
Block Channel
Block Channel
All Channels
2- 1 WCBS - DT 
Blocked
35 - 1 MELCO
59 - 1
Blocked Channel
35 - 1 MELCO
Analog Mode | 1 |
|
2
Channel 4
Blocked by AutoLock
Channel Blocking
Access Code | 3 |
| |
_ _ _ _ |
|
| 4 |
MENU | |
> | >< > |
After Setting your personal access code (see previous page), press
CURSOR < or > until you see Block Channel
highlighted.
Press CURSOR < or
>to select channels you wish to block. Press CURSOR > or < to select between Block and
Unblock.
Press CURSOR >
or < to select Block or
Unblock
When finished, press MENU on the remote control three times to exit the menu from the TV screen.
When Block
is selected, a message will appear to show you the channel that has been Blocked.
When Block is selected, a message will appear to show you the channel that has been Blocked.
Note : When you are in Digital Mode you can only block Digital Channels.
Note : When you are in Analog Mode you can only block Analog Channels.
HELPFUL HINTS
If you forget your code, the 0711 is the default and can be used to enter and create a new access code.
22
