Block / Clear ALL Channels AT the Same Time

BLOCK / CLEAR ALL CHANNELS AT THE SAME TIME

After blocking specific channels there may come a time when you want to block or clear all the channels at the same time. This can be done only after you have entered your access code and the AutoLock features are

displayed on the screen (refer to page 22).

Follow these steps for Digital Mode

1Press CURSOR > to select Block channel. Press the CURSOR > button to enter the Block Channel

2Press CURSOR < or > until All Channels

is highlighted. Press CURSOR > or < to toggle between Block and Unblock If Unblock is selected, all channels will be viewable. If Block is selected, ALL available channels will be blocked from viewing.

3When finished, press

MENU on the remote control four times to exit.

Digital Mode

AutoLock

Block Channel

Block Channel
All Channels	Unblock

2- 1 WCBS - DT

35 - 1 MELCO

59 - 1

Follow these steps for Analog mode

Analog Mode		1
			Press CURSOR > to
			select either Clear All or
			Block All
		2	If Clear All is set to on all
		2	channels will be viewable.
			If Block All is set to on
Clear All	On		all available channels will be
Clear All	On		blocked from viewing.
Block All	Off		blocked from viewing.
Block All	Off

3When finished, press MENUon the remote control four

times to exit the menu from the TV screen.

>< >

BLOCK OPTIONS

Block Options allows you to b lock programs by ratings instead of channels. entered your access code and AutoLock feature is displayed on the screen

This can be done only after you have (refer to page 22)

Follow these steps for both Digital and Analog Mode

1Press CURSOR < or > until you see Block Options highlighted

2Press CURSOR < or > to display the Block Options (Unrated, No Rating or Blocking) menu.

3Press CURSOR < or > until you see the desired Option is highlighted. When highlighted, each feature can be turned On or Off using CURSOR > or < on the remote control.

4When finished, press MENU four times to exit the menu.