7
1.2 HDI Installation
1.2

HDI Installation

The following example is to configure a local non-system plotter and network non-
system plotter.
Copy the Driver
1Unzip the driver file. This will create subdirectories for 2000, 2000i, 2002
and 2004.
Installing and Setting up the Driver for Local Plotter
1Open the AutoDesk Plotter Manager.
2In the AutoDesk Plotter Manager, double-click the Add-a-Plotter wizard.
3In the Add-a-Plotter wizard, read the Introduction, and then choose Next to
advance to the Add Plotter - Begin page.
4On the Add Plotter - Begin page, choose My Computer. Choose Next.
5Choose Have Disk to locate the HIF file on that driver disk, and install the
driver supplied with your plotter.
6On the Add Plotter - Plotter Model page, select a manufacturer and model.
Choose Next.
•(Optional) The Import PCP or PC2 screen enables you to use configuration
information from a PCP or PC2 file created with an earlier version of
AutoCAD.
7On the Add Plotter - Ports page, select the port to use when plotting. Choose
Next. The ports available for the specified device are displayed.