1.1 ADI Installation
The following example is based on the assumption that AutoCAD is install in drive C: and the floppy drive is A:. AutoCAD is installed by the attached installer and has the standard directory configuration.
Copy the Driver
1
2
Using Windows Explorer, go to the floppy disk and select the driver “plpxc_e.dll”. Then select [Copy] from the [Edit] menu.
Go to the AutoCAD R14/DRV subdirectory, and select [Paste] from the [Edit] menu.
If AutoCAD is installed in a drive and directory that are different from the example, change the location accordingly.
Installing and Setting up the Driver
This section describes the procedures to install the driver into AutoCAD and make it available.
1 Start up AutoCAD R14 and select [Tools] and then [Preferences] to open the preferences dialog box.
2 | Chapter 1 Installing Plotter Driver |
