10 Chapter 1 Installing Plotter Driver
1.3

Driver Operation Reference

The driver setup information set in the “Preferences” box at driver installation can also
be changed when the PLOT command is executed.
Change Driver Setup
1Execute the PLOT command to open the “Print/Plot Configuration” dialog.
2Click the “Device and Default Selection” button.
3Select the 6030/6050 printer.
4Click the “Change” button at “Device Requirements” in the opened dialog
box.
5The “Change Device Settings” dialog box opens. This is similar to the dialog
box displayed at the driver installation. The driver setup information can be
changed with this dialog box.
This dialog box is almost the same as the “Device Setup” dialog box.
Select paper type: Select type of paper to be used from “Bond”, “Film”,
“Vellum” paper and “Use plotter setting”.