C O M M E R C I A L P R O D U C T S D I V I S I O N
Setting Up the EFX®
You do not need any special knowledge or experience to set up the EFX. However, because of the size and weight of the EFX, you will need to obtain appropriate assistance during assembly.
INSTALLATION REQUIREMENTS
Follow these installation requirements when installing the EFX. If you do not install the EFX according to the following guidelines, you could void the Precor Limited Warranty.
•Set up the EFX on a solid, flat surface. Unpack and assemble the EFX close to where you’ll use it. Make sure that the flat surface under the unit is smooth and level. A level unit is required for the user’s safety and for proper operation.
•Provide ample space around the unit. Open space around the unit makes for a safer mount and dismount.
•Fill out and mail the limited warranty card.The serial number is located on a label at the rear of the unit near the optional battery recharger receptacle. Write the serial number onto the Precor Limited Warranty card found on the back cover of this manual. Refer to Obtaining Service on page 7 and write the number there as well.
ASSEMBLY INSTRUCTIONS
To assist you in the assembly, the items in the Hardware kit, shown in Diagram 3, correspond to a particular letter in the alphabet. These letters appear throughout the assembly instructions. Refer to Diagram 3 on page 10.
1.Obtain assistance. Place the shipping carton close to the location where you plan to use the unit. Break down the side walls so that they lie flat. You may need to cut the tie wraps that hold the base frame and roller arms to the pallet.
2.Unpack the EFX534. Remove the packing materials and loose contents. Refer to the list on page 9.
3.Move the unit to the location where you plan to use it. Once you attach the handrails and base stabilizers, the EFX is difficult to move through a standard door frame. Make sure to assemble the unit where it will not have to be moved through any doorways.
CAUTION: Do not assemble the EFX if it is connected to the optional battery recharger. Remove the battery recharger from the EFX prior to assembly.
page 11
