Precor EFX534 Diagram 6 Route the cable and, attach the display, console to the, upright support

Models: EFX534

1 56
Download 56 pages 35.23 Kb
Page 13
Image 13
C O M M E R C I A L

C O M M E R C I A L

P R O D U C T S

D I V I S I O N

Diagram 6 Route the cable and

 

 

attach the display

 

 

console to the

 

 

upright support.

 

 

Display console

 

 

Cable

 

 

Upright support

 

 

1

2

 

8.Prepare for the attachment of the upright support to the base assembly. Diagrams 6 and 7. Remove the four phillips-head screws (D), two bolts (G), and two washers (H) from the Hardware kit. Place one washer (H) on each of the two bolts (G). Keep the fasteners together.

CAUTION: Do not stretch, crimp, or damage the cable. Excess cable may be gently pushed into the base assembly. Cables damaged by improper installation will not be covered by the Precor limited warranty.

9.Route the display console cable through the upright support. Diagram 6, #1 Remove any tape or wire ties on the cable. Have an assistant hold the upright support securely while you grasp the display console in one hand and route the cable through the upright support with the other.

10.Attach the display console. Diagram 6, #2. Use the four phillips-head screws (D) to attach the display console to the upright support. Have your assistant hold the upright support securely while you align the mounting holes and tighten the screws.

page 13

Page 13
Image 13
Precor EFX534 Diagram 6 Route the cable and, attach the display, console to the, upright support, Display console, Cable