Precor EFX534 Setting a Workout Time Limit, Setting a Pause Time Limit, Reset, Enter, QuickStart

C O M M E R C I A L P R O D U C T S D I V I S I O N

SETTING A WORKOUT TIME LIMIT

You can limit how long a user works out by setting a duration between 1 and 240 minutes.You can also choose NO LIMIT which allows the user to select a course and work out indefinitely.

Note: The QuickStart program is automatically set at the custom settings limit.

Use the ▼▲ keys to select a workout time limit. For example, if you set the workout time limit to 20 minutes, the EFX allows users to specify a workout between 1 and 20 minutes. Users would not be allowed to specify a time longer than 20 minutes.Take into account that the user will get an additional five minute, cool-down period appended to his or her workout, so adjust the time limit accordingly.

SETTING A PAUSE TIME LIMIT

Use the ▼▲ keys to set a Pause time limit between 1 and 120 seconds (two minutes).

Important: Changes to the Pause time become effective only when the power source for the EFX is the optional battery recharger. If no battery recharger is connected and the stride rate drops below 40 strides per minute, the EFX moves into its thirty second shut down mode. Refer to page 31.

VIEWING THE ODOMETER, HOURS OF USE, SOFTWARE VERSION AND ERROR LOG

The display console keys that you need to press to view the odometer, the num- ber of hours the EFX has been in use, the software version and any error codes, are as follows:

Reset, Enter, QuickStart

Important: Remember to begin at the Precor banner. After pressing Reset, the next key in the sequence must be pressed within 1/3 second.

The numbers 6, 5 appear on the display as you press the associated key.

The field name Odometer appears briefly and then the odometer value (the cumulative strides users have travelled) appears.When the Select key is pressed the word STRIDES appears on the display indicating that the odometer value equals the total strides logged by the EFX.When the key is released, the odometer value reappears.

Press Enter and the number of hours that the unit has been in use appears.The EFX notes the passing of minutes, but the numeric value that appears is truncated to the nearest full hour. When the Select key is pressed the word HOURS appears on the display.When the key is released, the numeric value reappears.

Press Enter again and the unit’s three digit SW Version (upper board software version number) appears on the display.

Press a Select key to view the lower board's version number. The Select key toggles between the upper and lower board’s version numbers.

page 25