C O M M E R C I A L P R O D U C T S D I V I S I O N
13.Connect the cable. Diagram 8, inset. Insert the cable into its receptacle. Just like a telephone connection, a definite "click" is heard when a good connection is made. If you do not hear a "click," try reinserting the cable connection again.
14.Push excess cable inside base tube. Diagram 8. Carefully, push any excess cable behind the height adjustor threads that protrude from inside the base tube.
Diagram 9 Place the base on supportive blocks.
Adjustable rear pad
Base assembly
Supportive wedge
15.Rotate the rear pads. Diagram 9, inset. Ask your assistant to stabilize the unit while you rotate the rear adjustable pad to the highest position. This procedure lifts the base assembly off the floor which provides better access to the fasteners.
16.Place the base assembly on the supportive wedge. Diagram 9. Have an assistant grasp and lift the upright support so that you can slide a wedge (packing material) under the front of the unit.
page 15
