5.Lift the speaker assembly from the computer.
Installing the Speakers
1.Place the speakers in their slot and route the cables through the channels.
2.Place the LED silicon tubes on the computer.
3.Affix the tape that secures the LED silicon tubes to the computer.
4.Install:
a.system board
b.WLAN card
c.palmrest
d.keyboard
e.optical drive
f.hard drive
g.memory module
h.access panel
i.SD card
j.battery
5.Follow the procedures in After Working Inside Your Computer.
Removing the Display Assembly (Touch)
WARNING: For the Touch system, the display assembly is a single component and should not be further dismantled.
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.battery
b.access panel
c.memory module
d.hard drive
e.optical drive
f.keyboard
g.palmrest
26
