f.keyboard
g.optical drive
h.hard drive
i.memory module
j.WLAN card
k.access panel
l.SD card
m.battery
6.Follow the procedures in After Working Inside Your Computer.
Removing the Camera Module
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.battery
b.memory module
c.hard drive
d.optical drive
e.keyboard
f.palmrest
g.display assembly
h.display bezel
3.Remove the screw, peel the tape and disconnect the camera cable from the connector and remove the camera module from the display assembly.
Installing the Camera Module
1.Connect the camera cable to the connector on the camera module.
2.Align the camera module in its position on the display assembly.
3.Tighten the screw to secure the camera module to the display assembly.
4.Affix the tape to the camera module.
5.Install:
35
