Installing the Access Panel
1.Slide the access panel into its slot.
2.Tighten the screws to secure the access panel to the computer.
3.Install the battery.
4.Follow the procedures in After Working Inside Your Computer.
Removing the Memory Module
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.battery
b.SD card
c.access panel
3.Pry the securing clips away from the memory module until it pops up. Remove the memory module from its socket on the system board.
Installing the Memory Module
1.Insert the memory module into the memory socket and press until it clicks into place.
2.Install:
a.access panel
b.SD card
c.battery
11
